Medical

YOUR PARTNER IN HEALTHCARE SOLUTIONS.

Transforming healthcare by pioneering in advanced, exceptional Japan technology equipment and diagnostic devices


Nagase Philippines Corporation Medical Division provide a commitment to public health through the development of new and cutting edge products using only advanced technologies from Japan. This division will deliver high value-added products that help people live better and healthier lives.

Nagase Philippines Corporation Medical Division deals in wide range of products and continuously seek to expand our portfolio from immunoassay, hematology and chemistry that can serve the needs of healthcare providers, health facilities and laboratory diagnostic services.

Healthcare industry in Philippines has long been rapidly changing. In our effort to provide the most advanced technology at an affordable cost, we at Nagase Philippines Corporation Medical Division, bring you the latest equipment in Japan and has been used in our branches in ASEAN Countries like Singapore, Malaysia and Vietnam.

Our aim is to upgrade the quality of results that recipients of healthcare services receive and quality of life of Filipino people.

PRODUCTS

OC-Light ™ S FIT Test Kit

Oclightsfit

OC-Light ™ S FIT (Faecal Immunochemical Test, also known as iFOBT, immunochemical faecal occult blood test) is an immunochemical test intended for the detection of faecal occult blood (FOB) by professional laboratories and physician office laboratories. Measurement of FOB is useful as an aid to detect blood in stools when gastrointestinal (GI) bleeding may be suspected. OC-Light S FIT is recommended for use in routine physical examinations, monitoring and screening for GI bleeding in patients.

Specifications

Easy one-step operation
  • High haemoglobin sensitivity 50ng hHb/mL (10μg hHb/g of stool)
  • Immunochemical method
  • Result in 5 minutes
  • Hygienic and easy sampling operation

B-analyst S1 µTAS drop analyzer (HBA1C, CRP, HSCRP)

First pic
First pic
Second
Third
Fourth
Fifth

B-analyst s1 Point of Care (HBA1C, CRP, HSCRP)

Biochips utilize a combination at microfluidics, microfabrication, design, and optical technologies. Microchannels allow chemical reactions to occur in an extremely small space via reagents. Next, sensing technology enables accurate detection of target biomarkers using a trace amount of blood.

Biochips such as these are expected to play a major role in health care and medical testing in the future.

B-analyst realizes rapid and high accuracy measurement with only a drop of blood by utilizing µTAS and liquid reagents.

Specifications

Instrument
Product Name B-ANALYST
Detection Wavelength 635nm
Detection Stability ± 0.001 Abs.
Incubation Temperature 37 ± 1.0˚C
Interface For data input - output x 1
For bar code reader connection x 1
Display 20 rows x 4 columns monochrome LCD
Printer Builty-in thermal printer (paper width: 58 mm)
Data memory For recording measurement results of latest 100 samples
Calendar clock Built-in ( backup battery CR2032)
Electrical Characteristic Voltage AC100 - 240V
Supply Frequency 50/60 Hz
Power Input 250 w
Size / Weight 340(W) x 290(D) x 270(H) mm / 9.5 %keygen/
Reagents
Product Name B-analyst HbA1c B-analyst CRP B-analyst hsCRP
Measurement Time
7'30"
Sample Whole Blood Whole Blood | Plasma | Serum Whole Blood | Plasma | Serum
Sample Volume 4 µL 4 µL 9.5 µL
Measurement Method
7'30"
Measurement range 3.3 - 12.6% 0.1 - 20 mg/dl 0.1 - 4 mg/dl

OC-SENSOR IO

First
First
Second
Third
Fourth

OC-SENSOR IO Fully automated immunochemical fecal test for detecting gastrointestinal bleeding associated with disorders such as colorectal cancer, polyps and diverticulitis.

Reagents
Product Name Description Pack Size
V-PZ25 OC-Auto Sampling bottle 3 (with barcode) 100 pcs
V-PH18 OC-Auto 3 Latex Regeant 2 x 7 mL
V-PH46 OC-Auto 3 Buffer 200 mL
V-PH52 OC- Calibrator 2 Kit 1 x 3 mL
V-PH53 OC-Control LV1 (low) 2 x 5 mL
V-PH54 OC-Sensor Control LV2 (High) 2 x 5 mL

Specifications

Principle Latex agglunitination immuno-turbidimetry
Method One step rate essay
Working Speed 88 Tests/hour
Sample Rack 20 Samples : 5 samples x 4 racks
Reaction Cuvette Disposable acrylic cuvette 10 serial cuvette, Product name 'DISPO-10'
Sampling System Drawn up by sampling nozzle
Reageant Dispense Drawn up by regeant nozzle
Mixing System By spinning mixer
Thermostatic System 37°C Block Heater
Light Source L.E.D ( wavelength 660nm )
Light Detector Silicon Photodiode
Data Input Color LCD Touch Panel ( 5.7 inches )
Memory Capacity Sample: 5000 tests, QC: 1000 tests, Error: 1000 %tests
Data Output Built-in thermal printer, RS-232C, USB
Barcodes Sample barcode, rack barcode
Power Required AC100 - 240V, 50/60Hz, 150 VA
Mixing System By spinning mixer
Dimension W360 x D560 x H425 (mm) / 35kg

POCone Infrared Spectral Analyzer

First
First
Second
Third

The system utilizes an Infrared Spectrophotometer for the measurement of the ratio of 13CO2 to 12CO2 in breath samples, in clinical laboratories and point-of-care settings
The BreathTek® UBT for H. pylori Kit (BreathTek UBT Kit) is intended for use in the qualitative detection of urease associated with H. pylori in the human stomach and is indicated as an aid in the initial diagnosis and post-treatment monitoring of H. pylori infection in adults, and pediatric patients 3 to 17 years old.

Specifications

Reproductibility Standard Deviation - 0.3% or lower (Condition 10 measurements of ∆ 0% standard with 3% CO 2 concentration )
Precision Within ± 0.3% ( Condition Average value of measurements)
CO 2 concentration range to be measured 0.5% or higher
Necessary sample amount 120 ml/bag or more
Measuring time Approx. 2 mins. ( when measuring 2 bags for 1 sample)
Power Supply AC100 - 240V, 50/60 Hz
Power Consumption Approx. 250VA
Dimensions 220(W) x 272(H) x 361(D) mm
Weight Approx. 10 kg

Matsunami PLATINUM PRO Adhesive Glass Slide

Matsunami pro white
Fortified Adhesion

Fortified adhesion is realized by the development of the new coat material. Stabilisation of adhesion is shown after the preprocessing process ( M/W or autoclave) in the high PH buffer.

Fortified Adhesion

Background staining is reduced in special stains.

Use of glass most suitable for adhesive coating

Fine glass having high flatness and transmittance and causing less intrinsic fluorescence is used and suitable for fluorescence observation. It is product superior in the compatibility with the automated immunostaining.

Specifications

  • Product No.: PRO-01
  • Product Name: Platinum PRO WHITE
  • Color: White
  • Size (mm): 72 x 26 mm
  • Thickness: 0.9 to 1.2 mm
  • Frosted area width (mm): 15 x 26 mm
  • Package: 100 pcs

Matsunami TOMO® hydrophilic adhesion slides

Matsunami tomo

Matsunami TOMO® hydrophilic adhesion slides offer superior tissue adhesion, staining performance and slide surface fluidics. Proprietary slide coating ensures consistent performance even after exposure to heat stress and humid environmental conditions. Optimized for use with thermal printers.

Matsunami microscope slides are manufactured in Japan using optically clear, exceptionally flat, low fluorescence glass and finished with 90° and clipped corners. Slides are packaged 100 per box, 10 boxes per case (1000 slides).

Specifications

  • Weight: 12lbs
  • Dimensions: 12 x 8 x 6 in
  • Color: Blue, Green, Pink, White, Yellow
  • Slide Dimension: 75 mm x 25 mm x 1 mm
  • Wettability: Hydrophilic Slide Surface